hydroponic hydroponique

 

 

 

 

 

 

 

 

 

 

 

 

 









Français

 

système de table à marée flowtable


Ebb and Flow Table


système de table à marée flowtable


FlowTable User's Guideguide assemblage Europ

 

Ebb and Flow Table

The FlowTable is a very efficient tool that is widely used among horticulturists. It can be installed in no time. Your system will be up and running in 5 minutes. The table can be used all year round for your indoor plants. With its significant depth, it can be used with the following methods: tides, drop by drop (droplets) and NFT.

Made of shock-resistant material, it is designed for perfect draining, without any risk of flooding or clogged pipes.

ebb and flow table

Operation

To operate your ebb and flow table, you will need a pump and a timer. The ebb and flow table is a general-purpose system which enables you to use several media like the wool bread, the pearlite or of the clay balls.

Dimensions

It comes in 5 sizes : 920 x920 mm, 610 x1220 mm, 1220 x 1220 mm, 1220 x 1830 mm, and 1220 x 1830 mm (3’ x 3’, 2’ x 4’, 4’ x 4’, 4’ x 6’ and 4’ x 8’). All tables are over 150 mm (6”) deep.

ebb and flow table

Easy to use

The nutrient solution reservoir is the main component of any automatic watering system. Measuring and mixing the nutrient solution is easy with these heavy-duty reservoirs, made of black ABS plastic with easy-to-read scale marks. Three sizes are available: 100, 260 and 378 liters.

ebb and flow table

Ebb and flow cultivation


Install the water supply and drainage components (PPI accessories). When using rock wool, place some slabs at the bottom of the table, then put some cubes over them. For maximum root development, make sure that the cubes can't move during the first few days. As for clay pebbles, since they float, you must use a net or a screen to make sure that they stay in the table during the ebb and flow process. If you are using pots, you simply have to put them on the table.


Ebb and FlowTable Cultivation

Ebb and flow table planning

Duration (weeks) Daily Irrigation (number of tides) Ec (adapt to plant's capacity)
Propagation by cuttings 1 18 hours Usual watering (avoid flooding) 0,5-0,8
Growth 1 to 3 12 hours 1 to 5 / day 1-1,5
Upper portions rapid development stage
Prebloom 1 or 2 12 hours 7 to 10 / day 1,2-1,7
Growth stagnation stage / First signs of flowering
Flowering 1 12 hours 7 to 10 / day 1,3-1,8
Small fruits development and multiplication stage
Flowering
2 or 3 12 hours 5 to 7 / day 1-1,5
Fruit growth stage
Flowering 1 or 2 12 hours 3 to 5 / day 0
Ripening stage
20°C<Room temperature<28°C 20°C<Water temperature <25°C

Drop by drop

Install a drop by drop irigation system supplying each one of your plants, set up one or more drainage of water. In the rockwool case, position rockwool breads in the content of the table then place your cubes at the top. In the pots use case, you just have to pose them on the table and to connect them to the irrigation.

Drop by drop

Drop by drop planning table

Duration (weeks) Daily Lighting time by day Ec (adapt to plant's capacity)
Propagation by cuttings 1 18 hours 18 hours 0,5-0,8
Growth 1 to 3 12 hours 18 hours 1-1,5
Upper portions rapid development stage
Prebloom 1 or 2 12 hours 18 hours 1,2-1,7
Growth stagnation stage / First signs of flowering
Flowering 1 12 hours 12 hours 1,3-1,8
Small fruits development and multiplication stage
Flowering
2 or 3 12 hours 12 hours 1-1,5
Fruit growth stage
Flowering 1 or 2 12 hours 12 hours 0
Ripening stage
20°C<Room temperature<28°C 20°C<Water temperature <25°C

NFT

Install the water arrival on one side of the table over all the width, establish a slope of at least 6° by taking the water arrival like high point. Install the water drainage on the opposite side to the arrival. Position the capillarity carpet on all the bottom of the table. You just have to place your root cubes on the carpet and to cover the table by a cover or an opaque lid in which you will have taken care to cut out spaces so that the air parts of your plants can develop or fill by balls of clays.



NFT

Ebb and flow table planning

Duration (weeks) Daily Irrigation Ec (adapt to plant's capacity)
Propagation by cuttings 1 18 hours continuous 0,5-0,8
Growth 1 to 3 12 hours continuous on day,
alternative by section of 10mn the night
1-1,5
Upper portions rapid development stage
Prebloom 1 or 2 12 hours continuous on day,
alternative by section of 10mn the night
1,2-1,7
Growth stagnation stage / First signs of flowering
Flowering 1 12 hours continuous on day,
alternative by section of 10mn the night
1,3-1,8
Small fruits development and multiplication stage
Flowering
2 or 3 12 hours continuous on day,
alternative by section of 10mn the night
1-1,5
Fruit growth stage
Flowering 1 or 2 12 hours continuous on day,
alternative by section of 10mn the night
0
Ripening stage
20°C<Room temperature<28°C 20°C<Water temperature <25°C

Growing tips

When implanting your cuttings (except for clay pebbles), be careful not to over-irrigate during the first week. You must wait until the root system is fully developed before you water your plants freely. With the NFT system, you must only transfer your cuttings when the roots can be in direct contact with the capillary carpet.


FlowTable Dimensions

Code

Mesure units Width Length

FT-24

mm 610 1220
cm 61 122
inches 24 48
FT-33 mm 910 910
cm 91 91
inches 36 36
FT-44 mm 1220 1220
cm 122 122
inches 48 48
FT-46 mm 1220 1830
cm 122 183
inches 48 72
FT-48 mm 1220 2440
cm 122 244
inches 48 96